ResMed AirSense 11 CPAP Support

Setup checklist

1. Place the device on a stable, level surface with the air inlet and filter cover clear.
2. Insert the clean HumidAir 11 water tub correctly and do not fill above the maximum line.
3. Connect standard tubing or the AirSense 11-compatible ClimateLineAir 11 heated tube.
4. Attach the mask, connect power and confirm that the prescribed therapy settings are present.
5. Follow the on-screen setup prompts, run mask fit and lie in your normal sleeping position while checking the seal.
6. Connect to myAir only if you choose to use remote therapy summaries and coaching features.

Ramp, humidity and Climate Control

Ramp can begin therapy at a lower comfort pressure before progressing to the prescribed treatment pressure. Humidity and tube temperature affect dryness and condensation. ClimateLineAir 11 enables compatible heated-tube controls. If you experience dryness, rainout or discomfort, review mask leak and room conditions and speak with your clinician or White Aspects before making major changes.

Cleaning and replacement

• Empty and air-dry the HumidAir 11 tub daily; clean it by the method in the current user guide.
• Clean mask cushions frequently and other mask parts at the interval specified by the mask manufacturer.
• Wash reusable tubing regularly and allow it to dry completely away from direct sunlight.
• Inspect the disposable filter and replace it when dirty, damaged or at the recommended interval. Do not wash it.
• AirSense 10 and AirSense 11 water tubs, filters and heated tubes are not all interchangeable.

Video guides