ResMed AirMini Travel CPAP Support

First-time setup

1. Place AirMini on a stable surface with the air inlet clear.
2. Connect the power supply and the AirMini-specific tubing.
3. Connect the correct AirMini setup pack for your chosen compatible mask. Standard CPAP tubing does not connect directly to AirMini.
4. If your setup supports HumidX or HumidX Plus, insert the cartridge exactly as shown in the manufacturer instructions. Do not wash or wet a HumidX cartridge.
5. Install the AirMini app, enable Bluetooth, press the Bluetooth button on the device and enter the four-digit key printed on the machine when prompted.
6. Fit the mask, run the mask-fit check and start therapy only with the prescribed settings.

Mask and accessory compatibility

AirMini requires mask-specific connectors or setup packs. A complete mask alone may not include the AirMini connector, vent module, tubing or HumidX housing needed for travel use. Confirm the exact setup before ordering—especially when changing between P10 for AirMini, N20, F20 or another supported option.

Cleaning and maintenance

• Clean the mask and AirMini connector according to their current user guides and allow all washable parts to air-dry away from direct sunlight.
• Wash AirMini tubing only as directed by the manufacturer; never place it in a washing machine or dishwasher.
• Wipe the machine exterior with a dry or lightly damp cloth. Do not immerse the device.
• AirMini inlet filters are disposable and must not be washed. Inspect and replace them according to the user guide or sooner if damaged or dirty.
• HumidX and HumidX Plus are disposable. Do not wash them; replace them according to the package and current manufacturer instructions.

Video guides